Charging The Battery - Snow Joe SUNJOE 24V-TB-CT Manual Del Operador

Sopladora inalámbrica compacta de turbina a chorro – herramienta fundamental
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

• You can "top-off" your battery pack's charge before starting
a big job or after a long day of use.

Charging the Battery

1. Push the push lock button on the battery to pull the
battery pack out of the equipment (Fig. 1).
Fig. 1
Push
lock
button
2. Depending on your Snow Joe
how to recharge your lithium-ion battery will vary.
You may either insert your 24-volt battery into the
24VCHRG-QC Quick Charger (sold separately) or the
24VCHRG-DPC Dual Port Charger (sold separately)
(Figs. 2 – 3).
Fig. 2
Charging
red
24VCHRG-QC
quick charger
(Sold separately)
Fully
Charged
green
Battery
pack
Battery
Compartment
+ Sun Joe
charger model,
®
®
Battery pack
Fig. 3
Charging
red
Fully
Charged
green
3. The battery indicator LEDs will illuminate one by one
during the charging process. Unplug the charger
immediately when the 3 LEDs are all illuminated.
4. The 24VCHRG-QC Quick Charger (sold separately) and
the 24VCHRG-DPC Dual Port Charger (sold separately)
are also equipped with additional charging indicating
lights which will indicate the charging status (Figs. 2 – 3).
m
CAUTION!
FIRE HAZARD. When disconnecting the
charger from the battery, be sure to unplug the charger from
the outlet first, then disconnect the charger from the battery.
m
WARNING!
The chargers do not automatically turn
off when the battery is fully charged. Please take care not
to leave the battery plugged into the charger. Switch off or
unplug the charger at the mains when charging is complete.
5. Timely recharging of the battery will help prolong the
battery's life. You must recharge the battery pack when
you notice a drop in the equipment's power.
IMPORTANT! Never allow the battery pack to become fully
discharged as this will cause irreversible damage to the
battery.
6. When charging is complete, remove the battery from the
charger by pulling the push lock button and sliding the
battery backward to unlock it from the charger.
Assembly
m
WARNING!
To avoid serious personal injury, read and
understand all safety instructions provided.
m
WARNING!
Do not insert battery until assembly is
complete. Failure to comply could result in accidental starting
and possible serious personal injury.
m
WARNING!
Before performing any maintenance,
make sure battery is removed. Failure to heed this warning
could result in serious personal injury.
8
Battery pack
24VCHRG-DPC
dual port charger
(Sold separately)

Publicidad

Tabla de contenido
loading

Tabla de contenido