Starting + Stopping - Snow Joe SUNJOE 24V-TB-CT Manual Del Operador

m
WARNING!
To prevent serious personal injury,
make sure the switch is in the OFF (0) position, the battery is
removed and the impeller has come to a complete stop before
attaching or detaching the tubes.
Attaching the Jet Blower Tube
1. Align the notches on the cordless turbine jet blower body
with the notches on the upper blower tube and slide
together until they click into place. Repeat with the upper
tube and the lower tube, making sure they click into place
(Fig. 4).
Fig. 4
Cordless
turbine jet
blower body
Notches
m
WARNING!
To avoid the risk of injury, it is not
recommended to disassemble the blower tube.
Operation
TOOL ONLY
BATTERY + CHARGER SOLD SEPARATELY
In order to operate this cordless jet blower you will need
an 24V iON+ System battery and charger. See page 12 for
battery and charger options and specifications, or for more
information visit sunjoe.com.

Starting + Stopping

m
CAUTION!
Starting, stopping, and restarting a DC
motor repeatedly within a few seconds can generate a great
deal of heat and damage the motor. To protect the life of your
cordless turbine jet blower, always wait at least five seconds
after stopping before restarting the jet blower.
1. Insert the battery into the battery compartment until it
clicks to lock it into position (Fig. 5).
Upper
blower
tube
Lower
blower
tube
9
Fig. 5
2. To start the cordless turbine jet blower, slide the ON/OFF
switch to ON (I) (Fig. 6).
Fig. 6
I (ON)
3. To turn the tool off, slide the ON/OFF switch to OFF (0)
(Fig. 7).
Fig. 7
Battery
pack
Battery
compartment
ON/OFF switch