Get Started; Bluetooth Pairing - Lenco SBW-801BK Manual Del Usuario

Get Started:

1: Make sure you have made all the necessary cable connections
before connecting the Soundbar to a wall outlet, the soundbar
will enter to standby mode, the indicator will light up in red.
2: Make sure the subwoofer is connected to the power, and turn
the button to "ON"
3: Short press
turn on the soundbar. The LED display will light up.
4: Press the source button on unit or Remote Control to choose
various sources.
Note: The Soundbar will re-enter the Standby Mode again if
there is no operation for 15 minutes.

Bluetooth Pairing:

1: Short press the Source button on the Soundbar to choose the
Bluetooth Source.
2: The LED display will light up
3: Press the Pair button on the side of the unit. The pairing
indicator will flash quickly.
4: Turn on the Bluetooth function on your devices and the device
will start to search for the Soundbar.
5: Select "SBW-801BK" from the list of found devices.
6: If asked, enter the password "0000" and press OK.
7: When successfully paired with your device, the indicator light
will be lit steadily.
Note: The Bluetooth playback is controlled by your device and
the buttons on the remote control.
Note: The operation range for the Bluetooth connection is
10 meters.
Note: If a mobile phone on which you are playing music receives
a call, the music will be interrupted and not played. After call
end, the devices are connected to each other again and playback
continues.
8: Press and hold the Bluetooth button on the Remote Control for
3 seconds to disconnect the Bluetooth pairing.
/SOURCE on unit or
12
on remote control to