Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
Instructions:
Please identify all parts no excessive rust or twist in hanging hardware on the hammock, and no
weld integrity or excessive rust on the hammock stand before assembly and use hammock.
PARTS LIST
PART
MATERIAL CODE
NO.
1
KUS2031-CS01
2
KUS2031-CS02
3
62KUS2031I103
4
62KUS2031B101
5
62KUS2190I101
6
17XA0901-----Y3
7
KUS2031-CS03
FIGURE 1
1
1
Step 1:
Insert bottom supports (#2) into bottom supports (#1).
Insert the long side beam (#3) into the magazine bag
(#13) before inserting the bottom supports (#2) into
the long side beam (#3). See Figure 1.
Use the correct bolts as indicated. Do not tighten any of the bolts until the hammock is completely assembled.
!
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings
!
required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
!
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
!
Quote the following FQC NO. when contacting the service center.
!
V-3
INTENDED FOR RESIDENTIAL USE ONLY.
KUS2035
PART
Q'TY
BOTTOM SUPPORT
BOTTOM SUPPORT
LONG SIDE BEAM
SHORT SIDE BEAM
SLING BRACE
CHAIN CONNECTOR
SIDE SUPPORT
3
13
3
2
2
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
STOP
DON'T RETURN TO THE STORE !
PAGE 1 OF 3
PART
MATERIAL CODE
NO.
2
8
17XA1002-----Y3
2
9
61K2035C00001BA
1
10
61K2035K00001BA
1
11
180703010501
2
12
18000221002
4
13
61K2035G00001BA
2
14
61K2035S00001BA
FIGURE 2
4
7
13
Step 2:
Insert the bottom supports (#1) into the side supports
(#7). Then, insert the side supports (#7) into the short
side beam (#4). See Figure 2.
PART
SUSPENSION CHAIN
PADDED SLING
PILLOW
SLING BRACE CAP
LEG CAP
MAGAZINE BAG
CHAIN WRAPPERS
7
1
1
COURTYARD CREATIONS INC.
Q'TY
4
1
1
4
4
1
4
Publicidad
Resumen de contenidos para Mainstays KUS2035
- Página 1 ASSEMBLY INSTRUCTIONS ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE INTENDED FOR RESIDENTIAL USE ONLY. KUS2035 Instructions: Please identify all parts no excessive rust or twist in hanging hardware on the hammock, and no weld integrity or excessive rust on the hammock stand before assembly and use hammock.
- Página 2 FIGURE 3 FIGURE 4 Step 3: Step 4: Insert the leg caps (#12) into the bottom supports Secure the suspension chains (#8) onto the chain (#1 and #2). See Figure 3. connectors (#6). Insert the sling braces (#5) into the sleeves of the padded sling (#9).
- Página 3 Warranty • This product is covered by Courtyard Creations Inc.'s. one–year limited warranty. • Proof of purchase (dated register receipt) is required for warranty claims. • It remains the customer’s responsibility for freight and packing charges to and from the service center. STOP! Missing A Part? No Need To Go Back To...
-
Página 4: Instrucciones De Armado
INSTRUCCIONES DE ARMADO ATENCIÓN: ESTE PRODUCTO NO ES PARA USO COMERCIAL; ESTÁ DISEÑADO ÚNICAMENTE PARA USO RESIDENCIAL. KUS2035 Instrucciones: Por favor, identifique todas las piezas sin oxidación excesiva o torcimiento en hardware colgando para la hamaca, y sin integridad de soldadura o oxidación excesiva sobre pie de hamaca antes de montar y usar la hamaca. - Página 5 FIGURA 3 FIGURA 4 Paso 3: Paso 4: Inserte los tapones de pierna (#12) en los soportes Asegure las cadenas de suspensión (#8) en los inferiores (#1 y #2). Véase la Figura 3. conectadores de cadena (#6). Inserte los tirantes de eslinga (#5) en las mangas de la eslinga acolchada (#9).
- Página 6 Garantía • Este producto está cubierto por una garantía limitada de un año con Courtyard Creations Inc. • Para cualquier reclamación de la garantía es necesario presentar el comprobante de compra (recibo de caja registradora con fecha). • El cliente será responsable por los cargos de empaque y envío a y desde el centro de servicio. ¡ALTO! ¿Le falta alguna pieza? No es necesario que regrese...