Publicidad
Idiomas disponibles
Idiomas disponibles
FIGURE 3
12
12
Step 3:
Insert the leg caps (#12) into the bottom supports
(#1 and #2). See Figure 3.
FIGURE 5
4
Step 5:
Hang the suspension chains (#8) onto the hooks
located on the side beams (#3 and #4). See Figure 5.
Note:
Make sure that the suspension chains (#8) are properly
connected without any twists or tangles.
Cleaning and Maintenance
• Wash frame parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach,
acid, or other solvents on the frame parts.
• The pillow and sling may be washed on the surface only by using mild soap and water or commercial
foaming upholstery cleaner if necessary. If washed, rinse well and hang to dry. Do not machine wash
or dry.
• We recommend the use of furniture covers to protect your hammock when not in use.
• Inspect and tighten all parts on a regular basis to ensure the proper performance and safety of your
hammock.
• In order to prolong the life and beauty of your hammock, we recommend that it be stored in a dry and
protected area during off season periods.
V-3
1
2
1
2
8
8
STOP
DON'T RETURN TO THE STORE !
FIGURE 4
6
14
14
12
8
11
12
Step 4:
Secure the suspension chains (#8) onto the chain
connectors (#6). Insert the sling braces (#5) into the
sleeves of the padded sling (#9). Place the chain
connectors (#6) on to the sling braces (#5) where there
are slits. Cover the sling braces (#5) with sling brace
caps (#11). Wrap the chains with chain wrappers (#14).
See Figure 4.
FULL ASSEMBLY
6
6
10
3
Step 6:
At the higher side of the hammock, tie the pillow (#10)
to the chain connectors (#6). See Full Assembly.
Note:
Check the hammock to ensure that all parts are in good
condition and properly assembled. Carefully examine
the frame to ensure that all parts (including welds) are
sound (free of excessive rust or cracks).
PAGE 2 OF 3
9
8
11
5
8
9
8
5
6
11
14
8
8
14
11
Publicidad
