Descargar Imprimir esta página

Fitting Instructions - bort medical AktiVen Manual De Instrucciones

Ocultar thumbs Ver también para AktiVen:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 19
– remove the medical device prior to radiological examinations
– remove it during longer periods of rest, e.g. when sleeping
– in case of numbness, remove the medical device
– in case of persistent complaints, consult the physician or
specialist retailer
– use the medical device in accordance with therapeutic
needs
– only use other products simultaneously after consultation
with your physician
– do not make any changes to the product
– do not wear it on open wounds
– do not use in case of intolerance of one of the materials used
– no re-use – this medical aid is intended for treating one
patient
– whilst wearing the medical device, please neither use any
creams nor ointments on or around it as they can destroy
the material

Fitting instructions

1
Pull the stocking over the lower arm and take hold of the
inside of the heel.
2
Hold the heel firmly, pull the stockings forwards and turn
them inside out up to the heel.
Tip: Use the BORT AktiVen
steps.
3
Take hold of the overlapping material in the heel area
and slip over your foot until the knitted heel fabric is
over the heel.
Tip: For the stockings, carry out steps 1– 5 first with one leg
and then repeat for the second leg.
4
Pull the stockings up over the heel gradually and thus
simultaneously back with the right side out.
5
Then slip the stockings up step by step towards the
knee, using the palm of your hand to shape them to the
leg. At the same time, never pull the upper edge!
Tip: Turn the gripping edge (if one exists) inside out before
putting them on.
6
Then repeat steps 1 to 4 for the stockings with the
second leg. Turn both sides back the right way out and
Special Gloves for the following
®
EN
9

Publicidad

loading