Switching Modes - Pioneer SGY-PM930H Manual De Usuario

Switching modes

• When using SGX-CA600, the firmware version is required to be the latest version.
• Pedaling monitor mode (Page 16)
Can be switched with SGX-CA600. Cannot be switched with cyclocomputers from
other manufacturers. When the mode is switched to pedaling mode, the LEDs on the
sensors light green for 10 seconds.
Current mode
Dual power meter
Single power meter
• Dual power meter mode (Page 20)
The mode can be switched on SGX-CA600 or by operating the right sensor push
switch. When using with another manufacturer's Cyclocomputer, switch using
method 1. When the mode is switched to powermeter mode, the LEDs light orange
for 10 seconds.
Current mode
Pedaling monitor
Single power meter
Method 1
(Right sensor push switch)
Cannot be switched
Cannot be switched
Method 1
(Right sensor push switch)
Cannot be switched
○
Method 2
lighting
(SGX-CA600)
method
○
The LEDs light
green for 10
○
seconds
Method 2
lighting
(SGX-CA600)
method
○
The LEDs light
orange for 10
○
seconds
EN
LED
LED
5