Ejecting The Encode Syringe - Mettler Toledo Rainin AutoRep S Manual Del Usuario

Ejecting the Encode syringe

Operation
1.
Hold the AutoRep
2.
Empty the syringe by pushing the lock-
ing/filling lever to its lower stop.
3.
Swing out the locking/filling lever
(the piston will then be decoupled).
4.
Hold the AutoRep
container. Press the ejection key down,
releasing the cylinder.
The syringe will be ejected.
Warning!
Residues of the medium might be present
on the syringe orifice. The syringe should
only be ejected in a manner that does
not pose a hazard to the user or other
persons.
Note:
The tightness of the seal of the syringes is
not guaranteed for repeated dispensing of
high viscosity media.
12
™ S over a vessel.
™
S over the waste
2
3
4