Panasonic ES8228 Instrucciones De Operación página 5

Charging with the self-cleaning recharger
Thoroughly wipe off any drops of water on or around the recharger so that it is dry before charging it.
You can charge without the recharger.
3
2
Attach the detergent
cartridge and the
water tank to the
self-cleaning
recharger.
Page 7
Insert the appliance
plug.
Plug in the adaptor.
Remove the
protective cap and
then attach the
shaver.
• Turn the shaver off before
attaching.
• Check that the outer foil is not
deformed or damaged when
you are attaching the shaver.
• The backlight of the LCD
panel glows and charging
starts.
• Charging is completed when
the backlight of the LCD panel
blinks.
(Max. 1 hour later)
• You can keep the shaver attached to the recharger, or
connected to the adaptor, when not using it to maintain full
battery capacity. You cannot overcharge the shaver.
• A special plug adaptor may be required in some areas.
Charging without the self-cleaning recharger
1. Insert the appliance plug into
the shaver.
2. Plug in the adaptor into a
household outlet.
5