Cleaning The Shaver - Panasonic ES8228 Instrucciones De Operación

Cleaning the shaver


2
1
Insert the appliance
plug.
Plug in the adaptor.
• Remove any soap or water
on the shaver if it has been
washed with hand soap or
any other detergent.
Course On recharger
clean
Charge
Clean/Dry/Charge
Clean/Dry
Dry/Charge
Dry
*The lamp goes out in 6 seconds.
8
Remove the
protective cap and
then attach the
shaver.
• Turn the shaver off before
attaching.
• Check that the outer foil is not
deformed or damaged when
you are attaching the shaver.
Course selection indications
Changeable course
halfway through
dry charge
* 




SELECT
CLEAN
DRY
CHARGE
STATUS
Press [SELECT] to select the course.
• Each time you press [SELECT], the course changes from "Clean/
Dry/Charge""Clean/Dry""Dry/Charge""Dry""Charge".
• The courses start approximately 6 seconds after they are
selected.
• The course will be aborted if the power is cut off. In this case,
perform the course again from the beginning.
• Do not detach the detergent cartridge or the water tank as the
cleaning liquid may spill causing a malfunction.
Course completion summary
On recharger

clean dry charge





On shaver
Time required (guide)
[In the low temperature]
Backlight
Blinks 1 hour
Blinks 2 hours [+30 min]
– 1 hour [+30min ]
Blinks 2 h 40 min
– 1 h 40 min