Jeep Wrangler 1997-2006
Jeep Wrangler Unlimited 1997-2006
8620, 8420, 8820
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Pre-Installation Requirements
• Remove original bumper prior to installation
• For '87-'95 Wranglers equipped with factory front tow hooks, these will need to removed and discarded. These
tow hooks are not compatible with Tubular Bumpers.
Installation Steps
Place bumper to frame rails and line up the holes on the mounting tabs with the front holes of the frame.
1
Replace Torx bolt (T45) and tighten as shown.
2
Care and Cleaning
• Wash only with mild soap & dry with a clean cloth.
• Do not use cleaning solvents of any kind.
Congratulations!
Thank you for purchasing one of the many quality Rampage® products offered by Lund International, Inc. We take the ultimate pride in our
products and hope you receive years of satisfaction from your investment. We have made every effort to guarantee that your product is
of the highest quality for fit, durability, finish, and ease of installation.
Installation Instructions
Double Tube Bumper
For proper installation and best possible fit, please read all instructions BEFORE you begin.
800-241-7219 • Visit us at Rampageproducts.com
Rampage Products is a trademark of Lund International, Inc.
Page 1 of 1
I-TB-8820 Rev. A