Protecting The Environment - Ribiland PRJET150L Manual De Instrucciones Y Mantenimiento

c) Replace the cap and tighten so that no air can enter.
d) If the water level drops in the body or it is not filling up properly, it is because there is an air intake.
In this event, check the suction hose connections, and then continue to refill the body.
e) Ensure that there is no water on the electrical parts of the pump.
f) Start up the pump and check again that there is no leakage from the body.
7) MAINTENANCE
 In winter, the pump should be thoroughly drained or kept in "frost free" conditions.
 Before each start-up, ensure that the seals are in good condition and that the connections are tight.

PROTECTING THE ENVIRONMENT

Do not dispose of with regular household waste.
When the appliance is out of order or cannot be repaired, the packaging, accessories and each
part of the appliance must be dismantled, separated and taken to a recycling depot in
accordance with applicable local regulation.
GB
4