How To Use The Menu Functions - JVC TM-2100PN Instrucciones

HOW TO USE THE MENU
FUNCTIONS
DISPLAY AND SELECTIONS IN THE <SET-UP
MENU> MODE (SETTING)
You can set the following set-up menu items.
• H. POSITION
• V. POSITION
Notes:
● Parameters for H. POSITION and V. POSITION can be set separately depending on the
video input (Input A (VIDEO), Input B (VIDEO) or Input B (Y/C)) selected by the input
select buttons on the front panel.
Select the required video input with the input select buttons on the front panel in
advance.
● WHITE BALANCE can be set individually at 6500 or 9300 for the colour temperature
value.
Set COLOR TEMP. to the value 6500 or 9300 in the <MENU> screen in advance.
1. While pressing the MENU button, press the
PHASE ( ) button.
The <SET-UP MENU> screen is displayed.
PHASE MENU
2. Press the PHASE (
to select the desired menu item.
A selection mark (3) is put next to the selected item.
PHASE CHROMA
H. POSITION
V. POSITION
WHITE BALANCE
CONTROL LOCK
B.P.S. LEVEL
REMOTE SELECT
3. Press the VOLUME/SELECT buttons to set.
– +
VOLUME/SELECT
● For the WHITE BALANCE setting, select the CUT OFF or
8
LCT0053-002A-H (EN)
(cont'd)
• WHITE BALANCE • B.P.S. LEVEL
• CONTROL LOCK • REMOTE SELECT
) or CHROMA (
Front panel Function
button displayed
M
PHASE ( ) Forwards selection mark (3)
5
CHROMA ( ) Reverses selection mark (3)
Front panel Function
button displayed
+ Increases (to max. value)
3
VOLUME/ Forwards the setting value
SELECT (+)
CUTO Selects CUT OFF setting
screen
– Decreases (to min. value)
VOLUME/
2
Reverses the setting value
SELECT (–)
DRV Selects DRIVE setting screen
Note:
DRIVE setting screen, then select the buttons (PHASE/
CHROMA/BRIGHT) corresponding to the function indicated
(R/G/B).
8
<SET-UP MENU> screen
1
2
PHASE
1
Selection mark (3): Indicates the
menu item you select.
2
Menu item: Menu items you can
select.
3
Setting display: Indicates the current
) button
settings (value).
4
Function display: The functions of
the front panel buttons (7 buttons on
the left.) correspond to the function
displayed.
Contents
Function
displayed
EXIT
Contents
DRV
CUTO
DISP
02.07.30, 2:46 PM
<SET–UP MENU>
‰ H. POSITION
: 00
V. POSITION : 00
WHITE BALANCE
CONTROL LOCK : OFF
B. P. S. LEVEL : 10
REMOTE SELECT : OFF
3
4
EXIT
– +
CHROMA BRIGHT CONTRAST MENU VOLUME/SELECT
<Front panel button>
Contens
M
Forwards the menu item
5
Reverses the menu item
– Lowers the adjustment
value (to the minimum)
+ Raises the adjustment
value (to the maximum)
3
Forwards the setting value
2
Reverses the setting value
Exits the <SET-UP MENU>
screen (release)
Selects DRV adjustment
Selects CUT OFF
adjustment
R Adjusts red signal level
G Adjusts green signal level
B Adjusts blue signal level
Turns the ON-SCREEN
display on or off. (This
function is effective only in
the DRIVE or CUT OFF
adjustment mode.)