JVC TM-2100PN Instrucciones página 9

HOW TO USE THE MENU FUNCTIONS
DISPLAY AND SELECTION IN THE <MENU>
SCREEN MODE (SETTING)
You can set the following menu items.
Set them depending on your needs.
• SHARPNESS
• COLOR TEMP.
• COLOR SYSTEM
1. Press the MENU button.
MENU
2. Press the PHASE (
to select MENU items.
PHASE CHROMA
SHARPNESS
COLOR TEMP.
COLOR SYSTEM
ASPECT RATIO
BRIGHTNESS P.S.
3. Press the VOLUME/SELECT buttons to set.
– +
VOLUME/SELECT
Menu items
SHARPNESS Picture sharpness
Colour temperature of
COLOR TEMP.
white balance
COLOR
Colour system
SYSTEM
ASPECT RATIO Aspect ratio
BRIGHTNESS Brightness Peak
P.S. Suppressor function
* Normally set the COLOR SYSTEM to the AUTO mode. If reception in the AUTO mode is not good,
set it to the exclusive mode (NTSC or PAL) corresponding to the received colour system.
4. If you want to set the other menu items, repeat
procedures 2 and 3.
5. Press the MENU button to quit.
MENU
LCT0053-002A-H (EN)
• ASPECT RATIO
• BRIGHTNESS P.S.
The <MENU> screen is displayed.
) or CHROMA (
A selection mark (3) is put next to the selected item.
Front panel Function
button displayed
M
PHASE ( )
5
CHROMA ( )
Front panel Function
button displayed
+
VOLUME/
SELECT (+)
3
VOLUME/
–
SELECT (–)
2
Purpose
00 +1
6500
AUTO
4 – 3
OFF
Front panel Function
button displayed
MENU EXIT
7
) button
Contents
Forwards selection mark (3)
Reverses selection mark (3)
Contents
Increases (to max. value)
Forwards the setting value
Decreases (to min. value)
Reverses the setting value
Setting range
+2 +3 +4 +5
9300
NTSC AUTO PAL
16 – 9
ON
Contents
Quits (or Releases) the
<MENU> screen
02.07.30, 2:46 PM
<MENU> screen
1
< MENU >
‰ SHARPNESS
: 00
COLOR TEMP. : 6500
COLOR SYSTEM : AUTO
ASPECT RATIO : 4–3
BRIGHTNESS P.S. : OFF
2
EXIT
–
PHASE CHROMA BRIGHT CONTRAST MENU VOLUME/SELECT
<Front panel button>
1
Selection mark (3): Indicates the
menu item you select.
2
Menu item: Menu items you can
select.
3
Setting display: Indicates the current
settings (value).
4
Function display: The functions of
the front panel buttons (7 buttons on
the left.) correspond to the function
displayed.
Function
Contens
displayed
M
Forwards the menu item
5
Reverses the menu item
– Lowers the adjustment
value (to the minimum)
+ Raises the adjustment
value (to the maximum)
3
Forwards the setting value
2
Reverses the setting value
EXIT Exits the <MENU> screen
Notes:
● BRIGHTNESS P.S. (or B.P.S.) stands
for Brightness Peak Suppressor. This
function is used to suppress (cut) the
white peak portion of the picture, so as
to reduce the picture's burning on the
screen (cathode ray tube).
● When the BRIGHTNESS P.S. (or B.P.S.)
function is ON, the suppressed white
peak portion (for example, the lit part of
a fluorescent lamp) seems to be blurred.
If required, lower the setting for the
B.P.S. LEVEL in the <SET- UP MENU>
screen mode, or turn off the BRIGHT-
NESS P.S. function.
● When the screen aspect ratio is set to
16-9 (16:9) the picture will be vertically
reduced.
● If REMOTE is displayed in the ASPECT
RATIO or BRIGHTNESS P.S. setting
values in the <MENU> screen, REMOTE
SELECT is set to "ASPT" or "B.P.S." in the
<SET-UP MENU> screen. In this case, it
is not possible to adjust the setting ranges
for ASPECT RATIO and BRIGHTNESS
P.S. If you need to make adjustments, use
the external control function or turn off the
REMOTE SELECT setting.
3
4
+
7