Product Description And Specifications - Bosch GBG Professional 6 Manual Original

OBJ_BUCH-1501-005.book Page 13 Wednesday, August 17, 2016 1:14 PM
Symbols
The following symbols can be important for the operation of
your power tool. Please memorise the symbols and their
meanings. The correct interpretation of the symbols helps
you operate the power tool better and more secure.
Symbols and their meaning
Keep your hands out of the grinding
wheel area while the machine is running.
Danger of injury in case of contact with the
grinding wheel.
Wear ear protectors. Exposure to noise
can cause hearing loss.
Wear safety goggles.
Wear a dust respirator.
Wear protective gloves.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for sharpening tools as well as for
grinding and deburring metal.
The machine may only be used for short-time operation
(60 min. max).
Technical Data
Double bench grinder
Article number
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
* The operating mode S2 (60 min.) designates short-time operation with a maximum operating duration of 60 minutes. After this period, switch off the
machine and allow it to cool down.
Bosch Power Tools
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Cover
2 Clamping nut
3 Clamping flange
4 Mounting flange(GBG 6: two-part; GBG 8: one-part)
5 Grinder spindle
6 Blade guard
7 Mounting holes
8 On/Off switch
9 Holder for the spark guard
10 Spark guard
11 Workpiece support
12 Open-end spanner
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
Noise Information
Sound emission values determined according to
EN 61029-2-4.
Typically the A-weighted sound pressure level of the product
is less than 70 dB(A). Uncertainty K =3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC including their amendments and complies with
the following standards: EN 61029-1, EN 61029-2-4,
EN 50581.
Technical file (2006/42/EC) at:
Robert Bosch Power Tools GmbH, PT/ETM9,
70538 Stuttgart, GERMANY
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch Power Tools GmbH
70538 Stuttgart, GERMANY
Stuttgart, 01.01.2017
GBG 6
3 601 B7A 0..
English | 13
GBG 8
3 601 B7A 1..
1 609 92A 2H2 | (17.8.16)