Special Safety Information; Hedge Trimmer Safety Warnings - Deltafox DG-EHT 6860 3D Traducción Del Manual De Instrucciones Origina

GB
h) Carefully inspect the area to be cut
and remove all wires or other foreign
bodies.
5) SERVICE
a) Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power
tool is maintained.

Special safety information

Hedge trimmer safety warnings

1)
a) Keep all parts of the body away
from the cutter blade. Do not re-
move cut material or hold material
to be cut when blades are moving.
Make sure the switch is off when
clearing jammed material. A mo-
ment of inattention while operating the
hedge trimmer may result in serious
personal injury.
b) Carry the hedge trimmer by the
handle with the cutter blade
stopped. When transporting or stor-
ing the hedge trimmer always fit the
cutting device cover. Proper han-
dling of the hedge trimmer will reduce
possible personal injury from the cutter
blades.
c) Keep cable away from cutting area.
During operation the cable may be
hidden in shrubs and can be acciden-
tally cut by the blade.
d) Hold the power tool only on the
insulated handle surfaces, as the
cutting blade may come into con-
tact with concealed power cables.
Contact between the cutting blade and
a live cable may render metallic com-
ponents live and result in an electric
shock.
56
2) FURTHER SAFETY DIRECTIONS
a) This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been
given supervision or instruction con-
cerning use of the appliance by a per-
son responsible for their safety.
b) Children should be supervised to en-
sure that they do not play with the ap-
pliance.
c) When using the hedge trimmer, please
wear gloves, safety goggles, sturdy
shoes and long trousers.
d) Before each use, check the power
supply lead and the extension cable
for damage and ageing. Do not use
the equipment if the cable is damaged
or worn.
e) Before the work work, search the
hedge for concealed objects, e.g.
cable etc.
f) Work only in daylight or with good arti-
ficial lighting.
g) When working, always hold the equip-
ment firmly in both hands and at a
distance from your own body.
h) Lay the connecting cable such that it
cannot be caught on twigs or similar
whilst working.
i) If the cable is damaged during use,
disconnect it immediately from the
mains. Do not touch the cable before it
is disconnected from the mains.
j) The equipment is intended for cutting
hedges. Do not use the equipment
for cutting twigs, hard wood or other
items.
k) Do not try to release a jammed/
blocked blade before switching off the
equipment.