Control Buttons; Transmit And Receive Procedure - Floureon FC200 Manual Del Usuario

Control Buttons

Flash Light/Lamp
Channel/Sub-Code Up Key
Call Tone Button
Channel/Sub-Code Down Key
Display Screen Guide

Transmit and Receive Procedure

Your two-way radio contains a transmitter and a receiver. To control your exposure and ensure
compliance with the general population/uncontrolled environment exposure limits, always
adhere to the following procedure:
• Transmit no more than 50% of the time.
• To receive calls, release the PTT button.
• To transmit (talk), press the Push-to-Talk (PTT) button in front of the face.
• Hold the radio in a vertical position with the microphone (and other parts of the radio including
the antenna) at least one inch (2.5 centimeters) away from the nose or lips. Keeping the radio
at a proper distance is important to ensure compliance.
Note:
RF exposure decreases with increasing distance from the antenna.
• Body Worn Operation. When worn on the body, always place the radio in a approved clip for
this product.
Two-way Radio Operation
• Use only approved supplied or replacement antennas and audio accessories. Use of
non-approved antennas and wired or wireless accessories may exceed the applicable RF
exposure guidelines (iEEE, ICNIRP or FCC).
Installing the Three AA NiMH Rechargeable Batteries(or Alkaline Batteries)
Antenna
PTT Button
Lamp Button
1. Battery Indicator
2. Scan
3. High Power
4. Dual Watch
5. Receive
Radio On/Off,Volumn Knob
Accessory Port
USB Charging Port
Menu/Lock Button
Scan/Monitor/Button
Mic
Speaker
6. Transmit
7. IVox
8. Interference Eliminator code
9. Keypad Lock
10. Channel
EN-2