Measurement Procedure - HoMedics BPS-060 Manual De Instrucciones

Note:
If it is not possible to fit the cuff to your left arm, it
can also be placed on your right arm. However, all
measurements should be made using the same arm.
To use on the right arm, you must position the artery
symbol " " over the main artery. Locate the main artery by
pressing with two fingers approximately 1" (2 cm) above
the bend of your elbow on the inside of your right arm.
Identify where the pulse can be felt the strongest.This is
your main artery.
Main Artery
BPS-060_B.indd 19-20 BPS-060_B.indd 19-20
17

MEASUREMENT PROCEDURE

Important Notes:
• Blood pressure changes with every heartbeat and is
in constant fluctuation throughout the day.
• Blood pressure measurement can be affected by the
position of the user, his or her physiologic condition
and other factors. For greatest accuracy, wait 1
hour after exercising, bathing, eating, drinking
beverages with alcohol or caffeine, or smoking to
measure blood pressure.
• Before measurement, it is suggested that you sit
quietly for 15 minutes as measurements taken
during a relaxed state will have greater accuracy.
You should not be physically tired or exhausted
while taking a measurement.
• During the measurement, do not talk or move your
arm or hand muscles.
• See page 23 for additional notes regarding your
blood pressure measurement.
If you are using this blood pressure monitor for the first
time, please remove the protective film from the screen.
18
5/01/10 1:27 PM 5/01/10 1:27 PM