Measurement Procedure - HoMedics Walgreens 518729 Manual Del Usuario

MEASUREMENT PROCEDURE

Important Notes:
• Blood pressure changes with every heartbeat and is in
constant fluctuation throughout the day.
• Blood pressure measurement can be affected by the
position of the user, his or her physiologic condition
and other factors. For greatest accuracy, wait 1 hour
after exercising, bathing, eating, drinking
beverages with alcohol or caffeine, or smoking
to measure blood pressure.
• Before measurement, it is suggested that you sit
quietly for 15 minutes as measurements taken
during a relaxed state will have greater accuracy.
You should not be physically tired or exhausted
while taking a measurement.
• During the measurement, do not talk or move your
arm or hand muscles.
• See page 25 for additional notes regarding your
blood pressure measurement.
If you are using this blood pressure monitor for the first
time, please remove the protective film from the screen.
17
1. Press the User Select Button to choose User 1,
User 2, or User 3.
After the user number is selected, press the
START/STOP button to confirm the chosen user.
2. With the cuff wrapped around your arm, press the
START/STOP button. Do not inflate the cuff unless it is
wrapped around your arm. All digits will light up to
check the display functions. The checking procedure
will be completed after about 3 seconds.
START
STOP
3. After all symbols disappear, the display will show
"00". The monitor is "Ready to Measure" and will
automatically inflate the cuff to start measurement.
OR OR
18