Operation - cecotec GrandHeat 2300 Flatbed Touch Manual De Instrucciones

ENGLISH
Fig. 2.
The minimum installation height is 85 mm.
The rear surface of appliance shall be placed against a wall.
Leave a minimum clearance of 30cm above the microwave, a minimum clearance of 20 cm is
required between the microwave and any adjacent walls.
Do not remove the legs from the bottom of the microwave.
Blocking the intake and/or outlet openings can damage the microwave.
Place the microwave as far away from radios and TV as possible. Operation of microwave may
cause interference to your radio or TV reception.
Plug the appliance into a power supply.
Warning: Do not install microwave over a range cooktop or other heat-producing appliance.
If installed near or over a heat source, the microwave could be damaged, and the warranty
would be void.

4. OPERATION

Clock setting
When the device is plugged in, it will beep once.
Tap the clock icon to set the time. The hour digits will blink.
Tap "+" or "-" to set the desired hour, from 00-23.
Tap the clock icon. The minutes digits will blink.
Tap "+" or "-" to set the desired minutes, from 00-59.
Tap the clock icon to save the time settings.
Note:
If the clock is not set, the current time will not be displayed when the device is turned on.
During the process of clock setting, press " STOP/CLEAR ", to go back to the previous status
automatically.
Timer
Tap the timer icon, the display will show 00:00.
Tap "+" or "-" to set the desired cooking time. The maximum time is 95 minutes.
Tap the Start/+30sec/Confirm icon to confirm.
When the set time is over, the device will beep 5 times.
Note: If the clock has been set (24-hour system), the display will show the current time.
Microwave cooking
Tap the microwave icon once. "P100" will be displayed on the screen.
62
GRANDHEAT 2300 FLATBED TOUCH WHITE/BLACK