Maintenance And Service - Bosch EasyRadio 12 Manual Original

OBJ_BUCH-3005-001.book Page 14 Monday, September 5, 2016 11:47 AM
14 | English
Setting the Time
– To set the time, press the button 10 until the hours indi-
cation flashes in display element e.
– Press the seek button 12 or the
til the correct hour setting is indicated.
– Press the button 10 again, so that the minutes indica-
tion flashes in display element e.
– Press the seek button 12 or the
til the correct minute setting is indicated.
– Press the button 10 a third time to store the time set-
ting.
Working Advice
Recommendations for Optimal Handling of the Battery
Protect the battery against moisture and water.
Store the battery only within a temperature range between
–20 °C and 50 °C. As an example, do not leave the battery in
the car in summer.
A battery that is new or has not been used for a longer period
does not develop its full capacity until after approx. 5 charg-
ing/discharging cycles.
A significantly reduced working period after charging indi-
cates that the battery is used and must be replaced.
Observe the notes for disposal.
Troubleshooting – Causes and Corrective Meas-
ures
Cause Corrective Measure
Radio not working
No power supply Completely insert the power-
supply plug and plug-in con-
nector or the charged battery
pack
Radio too warm or too cold Wait until the radio has
reached operating tempera-
ture
Radio not working in corded operation
Power-supply plug or connec- Check the power-supply plug
tion cable defective and the connection cable,
and have them replaced as
required
Wrong power-supply plug in- Use the original Bosch power-
serted supply plug (also available as
spare part)
Radio not working in cordless operation
Battery contacts contaminat- Clean the battery contacts
ed (e.g. by inserting and remov-
ing the battery several times)
or replace the battery
Battery pack defective Replace the battery
Battery pack too warm or too Wait until the battery has
cold reached operating tempera-
ture
1 609 92A 1PT | (5.9.16)
Cause
Radio suddenly fails
Power-supply plug or battery
seek button 11 un-
pack not properly or com-
pletely inserted
Bad radio reception
seek button 11 un-
Interference from other de-
vices or insufficient set-up lo-
cation
Time indication faulty
Back-up batteries of clock
empty
Back-up batteries incorrectly
inserted (wrong polarity)
When the corrective measures do not eliminate an error,
please contact an authorised service agent for Bosch power
tools.

Maintenance and Service

Maintenance and Cleaning
Keep the radio clean to ensure good, safe operation.
Wipe off debris using a moist and soft cloth. Do not use any
cleaning agents or solvents.
After-sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Corrective Measure
Plug in power-supply plug or
battery properly and com-
pletely
Place the radio in another lo-
cation with better reception
or at a greater distance to oth-
er electronic devices
Replace back-up batteries
Insert back-up batteries cor-
rectly
Bosch Power Tools