Product Info; Package Contents; Preparation; Installation Instructions - Pond Boss 52736 Manual De Instrucciones

Pond Liner
Questions, problems, missing parts?
Visit thepondboss.net for a step by step guide and videos

PACKAGE CONTENTS

Part Description
A Liner

PREPARATION

Before beginning assembly or operation of product, make sure all parts are present.
Compare parts with package contents list and diagram. If any part is missing or
damaged, do not attempt to assemble, install or operate the product. Contact Customer
Care for replacement parts.
• Estimated assembly time: 2 hours
• Tools Required for Assembly: Garden hose, Shovel.

INSTALLATION INSTRUCTIONS

Step 1. Mark the outline of your pond.
Step 2. Dig out your pond removing any debris or
rocks that may damage your liner.
Add approximately 2 in. of sand to the bottom of the
pond and compress. The sand will act as a cushion
beneath your pond liner.
Step 3. Open the liner and drape it across the pond
area, making sure to leave at least 10 in. (ideally 1 ft.)
of overlap around the perimeter of the pond.
Begin to fill the pond with water smoothing out any
wrinkles as you do this.
Step 4. When the pond is full, bury the excess liner in a
small trench around your pond with stones and rocks
for a professional finish.
PLEASE CALL CUSTOMER CARE BEFORE RETURNING ITEM TO STORE: 1-888-755-6750
1-888-755-6750
customercare@thepondboss.net
Monday - Friday
A
Qty
1
1
2
3
4
1