Using The Camera; Installing The Batteries - Cool-Icam S1000 Manual Del Usuario

5. Details for camera settings
Resolution
Quality
Metering
White balance
ISO
Exposure
Self Timer
Sharpness
Effect (Preview)
Effect (Playback)
Date Stamp
Quick View
Movie Size
White balance
Sounds
Frequency
Power Save
Language
Date/Time
Format
Reset All
Version
Note: Turning off power will not erase the settings.

6. Using the camera

6.1 Installing the batteries

1. Open the battery door.
2. Insert 2x AAA alkaline batteries into the battery compartment.
16M pixel resolution
8.0M pixel resolution
5.0M pixel resolution
3.0M pixel resolution
VGA resolution
Super Fine/Fine/Normal
Center/Multi/Spot
Auto
Daylight
Cloudy
Tungsten
Fluorescent
Auto/100/200/400/800
±2.0, ±1.7, ±1.3, ±1.0, ±0.7,
±0.3, 0
On/Off
Hard/ Normal/ Soft
Normal/ B&W/
Negative/ Lomo/
Sketch/ Red/ Green/ Blue/
Vivid
B&W/Sepia/Negative/Mosa
ic/Red/Green/Blue
On/ Off
On/ Off
VGA 640 x 480
QVGA 320 x 240
Auto
Daylight
Cloudy
Tungsten
Fluorescent
Off/On
50Hz / 60Hz
Off / 1Minute / 3 Minutes
English/German/Italian/
Portuguese/French/Spanis
h/ Japanese
YY/MM/DD;DD/MM/YY
MM/DD/YY;
Yes/ No
Yes/ No
Shows the firmware version
EN-4
4608x3456
3264x2448
2592x1944
2048 x 1536
640 x 480
Picture quality settings
Metering settings
Automatic white balance
White balance selected for shooting under
fine weather conditions
White balance selected for shooting under
cloudy conditions
White balance selected for shooting under
tungsten lighting
White balance selected for shooting under
fluorescent lighting
Sensitivity selection
Exposure setting
Self timer setting
Sharpness setting
Sepia/
Pencil
Effect setting
Date stamp setting
Quick view setting
Video resolution setting
Automatic white balance
White balance for shooting under fine
weather conditions
White balance for shooting under cloudy
conditions
White balance selected for shooting under
tungsten lighting
White balance for shooting under
fluorescent lighting
Sounds setting
Select power frequency in your location
Auto power off selection
Display language selection
Date or time setting
Format the MicroSD card
Reset all settings to factory default options