Publicidad
Idiomas disponibles
Idiomas disponibles
FIGURE 2
1
FRONT
HIGHER
TUBE
Step 2:
Place the arm assembly onto the bottom frame (#4). Make
sure that the higher tube on the bottom frame (#4) is facing
towards the front of the glider. See Figure 2.
FIGURE 4
Step 4:
Place the seat assembly (#5) onto the arm assembly.
See Figure 4.
FIGURE 6
14
15
15
Step 6:
Place cushions (#13, #14 and #15) onto the seat assembly.
Secure the cushions to the seat assembly by using the
velcro straps. See Figure 6.
V-3
2
4
5
13
DO NOT RETURN TO STORE!
STOP
FIGURE 3
1
Step 3:
Fasten the swing bars on the arm assembly to the bottom
frame (#4) by using bolts (#7), washers (#9), and plastic nuts
(#10). Keep the bolts loose. See Figure 3.
FIGURE 5
1
Step 5:
Fasten the seat assembly (#5) to the right and left arms (#1
and #2) by using bolts (#8), washers (#9), and plastic nuts
(#10). Make sure that all of the bolts have been tightened
completely. See Figure 5.
Cleaning and Maintenance
• Wash frame and fabric parts with mild soap and water, rinse
thoroughly, and dry completely. Do not use bleach, acid, or
other solvents on the frame or fabric parts.
•
The cushions
mild soap and water or a commercial foaming upholstery
cleaner if necessary. If washed, rinse well and hang to dry.
Do not machine wash or dry.
• We recommend the use of furniture covers to protect your
glider when not in use.
• Inspect and tighten all bolts and fasteners on a regular basis
to ensure the proper performance and safety of your glider.
• In order to prolong the life and beauty of your glider, we
recommend that it be stored in a dry and protected area
during off season periods.
PAGE 2 OF 3
10
9
2
4
10
9
55
#7 BOLT M6*55
5
10 9
2
10
9
75
#8 BOLT M6*75
may be washed on the surface only by using
9 9
9
7
9 9
9
7
8
8
Publicidad
