BaByliss E860XE Manual Del Usuario página 6

ENGLISH
E860XE BEARD TRIMMER
AND PRECISION PEN
A complete kit for cutting,
trimming
the beard,
sideburns and
precisely shaping contours,
creating original designs and
eliminating undesirable nose
and ear hair.
The kit comes with a charging
and storage stand for the two
trimmers.
THE TRIMMER
1. 1 comb cutting for 30
lengths (from 0.5 to 15mm,
in 0.5mm increments)
2. 2 blades with different
widths: 32mm, to trim the
beard, and 16 mm to style
Movable blade:
- Sharpened using 3D etching
process: for an exceptional
cutting edge
- Long-lasting,
CARBON HLD (Hard Like
Diamond)
hardwearing
stainless steel blade
Fixed blade:
- Titanium
longer life
These two
provide a
and combining
optimally reduces the friction
coefficient.
3. ON/OFF button (2 speeds)
4. Dial for adjusting cutting
and thinning
moustache,
eyebrows,
organic
coating: ultra
and 100%
coating:
technologies
perfect blade
them
length
5. Charging indicator light
PRECISION PEN
6. 3 interchangeable heads:
7. 1 clipper head, 8mm
blade, for trimming
8. 1 shaving head, 6mm
blade, for shaping
9. 1 special nose and ear
head
undesirable hair
10. Charging indicator light
11. Charging and storage
stand
12. Plug for using on the
mains and for charging
13. Cleaning brush
CHARGING THE TRIMMERS
1. Connect the plug to the
charging stand and plug
into the transformer. Place
the trimmers in the charging
stand and, before using for
the first time, charge for 16
hours. Ensure the switch
on each of the trimmers is
set to the OFF position.
2. Make sure the charging
indicator
when the units are in their
stand.
3. A full charge provides a
minimum of 30 minutes'
for
use of the trimmer and the
precision pen.
4. Subsequent charges should
also be 16 hours.
USE ON THE MAINS
To use the trimmer on the
mains, remove the plug from
6
for eliminating
lights are on