Installation Instructions - TVH Safe-T-Lock Instrucciones De Operación

CAUTION
Unit to be installed by qualifi ed technician
1. Mount the Safe-T-Lock™ / Safe-T-Lock™ Plus Programmable Code Switch with 2, #8 / ST3,9 screws.
(not provided)Recommend mounting in a easily accessible location, such as on the dash panel.
2. Install provided bushing to protect wire from chafi ng.
3. After connected, make sure the wires are not in tension.
INSTALLATION ON VEHICLES WITHOUT KEY SWITCH
Mounting Panel
SAFE
-T-
LOCK
(1) Unit will detect if the seat switch is normally open and switch polarity.
(2) For bigger loads, an external relay must be used.
(3) Connection not required on vehicles without key switch
Safe-T-Lock

INSTALLATION INSTRUCTIONS

Seat (1)
Bushing
Switch
RED
(3)
•
Fuse 10A (2)
-
BATTERY NEGATIVE
OR POSITIVE
+
-
BATTERY NEGATIVE
BATTERY POSITIVE
+
POSITIVE FEED TO
VEHICLE
9