Package Contents; Electrical Safety - DeWalt DW263 Traducido De Las Instrucciones Originales

EN GLI SH
– Health hazards caused by breathing dust
developed when working in concrete
and/or masonry.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual
before use.
DATE CODE POSITION (FIG. 1A)
The Date Code (m), which also includes the year of
manufacture, is printed into the housing.
Example:
2010 XX XX
Year of Manufacture

Package Contents

The package contains:
1 Pistol grip screwdriver DW263/DW264
or
1 Universal screwdriver DW268/DW269
or
1 Drywall screwdriver DW274/DW274KN/DW275/
DW275KN
1 Kitbox (K-models only)
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1A, 1B)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. Variable speed switch
b. Lock-on button
c. Forward/reverse slider
d. Depth adjustment collar (DW263/DW264/
DW274/DW274KN/DW275/DW275KN)
Versa Clutch (DW268/DW269)
®
e. Depth locator (DW263/DW264/DW274/
DW274KN/DW275/DW275KN)
f. Belt clip
g. Ball retainer (DW268/DW269)
24
INTENDED USE
Your DW263/DW264 screwdriver has been
designed for professional screwdriving applications
and for use as a nutsetter.
Your DW268/DW269 universal screwdriver has been
designed for professional screwdriving applications.
Your DW274/DW274KN/DW275/DW275KN drywall
screwdriver has been designed for driving drywall
fasteners through drywall board into timber or metal
framing studs.
Your DW274KN/DW275KN features a silent clutch
function.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
These screwdrivers are professional power tools.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
Dead Spindle Drive Clutch
This screwdriver is equipped with a dead spindle
feature; the spindle does not turn until the fastener is
pressed into the workpiece. This enables fasteners
to be placed onto the drive accessory of a running
screwdriver.

Electrical Safety

The electrical motor has been designed for one
voltage only. Always check that power supply
corresponds to the voltage on the rating plate.
Your D WALT tool is double insulated in
E
accordance with EN 60745; therefore no
earth wire is required.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D WALT service organization.
E
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in
the plug.
• Connect the blue lead to the neutral terminal.
WARNING: No connection is to be
made to the earth terminal.
Follow the fitting instructions supplied with good
quality plugs. Recommended fuse: 3 A.