need help?
My Dual power isn't picking up well.
The float in the dirty water tank may have been activated. Empty the dirty water tank
wait for the float to settle before re-starting your carpet washer.
• Check the dual spin power brushes for blockages and clear
• The dirty water tank may not be fitted correctly, also make sure the lid is pushed
down securely
• Check the nozzle for blockages and clear.
Why won't the water/detergent dispense?
Clean water tank may not be locked in position. The clean water tank valve
may be stuck, hold the clean water tank over the sink and press the valve
underneath to release.
Why won't my Dual power turn on?
The plug may not be fully pushed into the electrical socket. The fuse may need
changing.
Why won't the brushes spin?
Check the power brushes for blockages and clear.
• Check the belt. Go to 'Replacing the belt or brushbars'.
Any other servicing should be done by an authorized service representative. If
appliance is not working as it should, has been dropped, damaged, left outdoors,
or dropped into water, take it to a service centre prior to continuing use.
9