Troubleshooting - GreenWorks Tools 2402207 Manual De Utilización

Tabla de contenido

Publicidad

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
using a moist, soft cloth. Do not use strong solvents
or detergents on the plastic housing or plastic
components. Certain household cleaners may cause
damage, and may cause a shock hazard.
BATTERY PACK
„ Store the battery pack charged.
„ Once the charging light turns green, remove the
battery from the charger and disconnect the charger
from the outlet.
„ Recharge the battery pack anytime you have notice
there is less power. Never let the battery pack become
completely discharged.
„ After charging, the battery pack may be stored in the
charger as long as the charger is not plugged in.
WARNING
When servicing use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING
'R QRW DW DQ\ WLPH OHW EUDNH ÀXLGV JDVROLQH SHWUROHXP
based products, penetrating oils, etc. come in contact
with plastic parts. They contain chemicals that can
damage, weaken or destroy plastic.
WARNING
To avoid serious personal injury, always remove the
battery pack from the tool when cleaning or performing
any maintenance.
STORING THE BLOWER
Clean the blower thoroughly before storing. Store the
blower in a dry, well-ventilated place that is inaccessible
to children. Keep away from corrosive agents such as
garden chemicals and de-icing salts.
„ Store and charge your batteries in a cool area.
Temperatures above or below normal room
temperature will shorten battery pack life.
„ Once the light on the charger turns solid green,
remove the battery from the charger and disconnect
the charger from the outlet.
„ Do not store the battery pack on the tool.
„ Never store batteries in a discharged condition. Wait
for battery pack to cool and fully charge immediately.
„ All batteries gradually lose their charge. The higher
the temperature, the quicker they lose their charge.
If you store your unit for long periods of time without
using it, recharge the batteries every month or two.
This practice will prolong battery pack life.
English (original instructions)

TROUBLESHOOTING

PROBLEM
POSSIBLE
CAUSE
Motor fails
Battery is not
to start
secure.
when switch
trigger is
depressed.
Battery is not
charged.
Defective
speed switch.
Unit will not
Defective mo-
start.
tor.
Defective PCB
board.
The unit will
The air inlet
start, but air
or tube
ZLOO QRW ÀRZ
outlet is
through the
blocked.
tube.
3
SOLUTION
Ensure that the battery
is fully secured in
the blower. Refer to
Installing the Battery
section in this manual.
Charge the battery
pack according to the
instructions included
with your model.
Have the defective
parts replaced by an
authorized service
center.
Clear the blockage.

Publicidad

Tabla de contenido
loading

Tabla de contenido