Publicidad
Idiomas disponibles
Idiomas disponibles
61. Raise vehicle.
62. Reinstall the spare tire ring (2) using the four
original nuts (1).
63. Lower vehicle.
64. Route the harness (4) from the rear storage bin
along the rear edge of the cargo area and up
the D-Pillar.
65. Install adhesive mounting tabs (1, 3) and secure
harness with cable ties.
66. Remove the adhesive backing from the trailer
tow control module (B) and install it below the
driver side rear quarter window.
67. Route the harness and install the connector to
the module (B).
68. Remove the ground nut (1), install the ground
wires for the trailer tow harness, and install the nut.
7-28-15
www.mopar.com
16
Publicidad
