Making toasted sandwiches
IMPORTANT -
sandwich holders. If you do, you will damage the appliance and the
appliance will be difficult to clean.
If you are going to make only one toasted sandwich, do not put
anything else in the other slot.
The time necessary to make a toasted sandwich differs greatly from the
time necessary to toast a slice of bread.
WARNING
-
appliance is switched on.Always use the slot that is nearest to you when
you are preparing only one toasted sandwich.
C
11
To open the sandwich holder, push the slides towards the centre of
the sandwich holder as indicated by the arrows.
C
2
Put the sandwich holder down and leave the lid wide open.
C
3
Prepare a sandwich and put it in the sandwich holder.
You can use different types of bread and different ingredients, such as
cheese, ham and tomatoes.
C
4
Close the lid and put the sandwich holder in the toaster.
The locking mechanism will automatically adjust itself to the thickness of
the sandwich.
A groove in the sandwich holder will prevent any juice from leaking into
the toaster.
You can prepare two toasted sandwiches at the same time by putting a
sandwich holder in each slot.
C
5
Select the desired browning setting, push the toasting lever down
to switch the appliance on and press button i i .
Between e.g. 4 to 7 is recommended.
6
Remove the sandwich holder when the appliance has switched
itself off.
Only touch the handles of the sandwich holder; the holder itself is very
hot.
7
Put the holder on a breadboard and remove the toasted sandwich
with a wooden spatula.
Never make toasted sandwiches without using the
Never place empty holders in the slots when the
ENGLISH
5