Oven Controls
1. Convection Cooking Modes:
cooking modes use increased air circulation to improve
performance. The type of benefit depends on the
the Cooking Modes section for more information.
2. Traditional Cooking Modes:
Lo, and Warm. See the Cooking Modes section for
more information.
3. Clean:
and Steam Clean. See the Cleaning the Oven section
for important information about using these modes.
4. Start:
Must be pressed to start any cooking,
cleaning, or timed function.
5. Cancel/Off:
Cancels ALL oven operations except
the clock, timer, Warming Drawer and Warming Zone.
6. Cook Time:
Counts down cooking time and turns
off the oven when the cooking time is complete. Press
the Cook Time pad, use the number pads to program
a cooking time in hours and minutes, then press Start.
and Convection Roast.
7. Clock:
Sets the oven clock time. Press the Set
Clock pad, then use the number pads to program the
clock. Press Start to save the time.
8. Timer On/Off:
Works as a countdown timer.
Press the Timer On/Off pad and the number pads
to program the time in hours and minutes. Press the
Start pad. The timer countdown is complete. To turn
the timer off press the Timer On/Off pad.
9. Delay Time:
Delays when the oven will turn on.
Press the Delay Time pad and use the number pads
to program the time of day for the oven to turn on
then press Start. Press the desired cooking mode and
temperature then press Start. A Cook Time may also
be programmed if desired. Follow the directions under
Cook Time for setting this feature. This can only be
and Self-Clean.
NOTE: When using the Delay Time feature, foods that
1 hour before or after cooking. Room temperature
the oven light is off because heat from the bulb will
speed harmful bacteria growth.
49-80763
10. Oven Light:
Convection
11. Lock Controls:
pressing the pads does not activate the controls. Press
the Lock Controls pad, for three seconds to lock or
unlock the control. Cancel/Off is always active, even
when the control is locked.
12. Warming Drawer (on some models):
keep hot, cooked foods at serving temperature. Press
the Warming Drawer
select the temperature setting. Press 1 for Low, 2 for
Medium or 3 for High, then press Start. Drawer is
below the Oven.
NOTE:
Warming Drawer. To turn off, press the Warming
Drawer pad.
13. Probe (on some models):
food temperature and turns the oven off when the
food reaches the programmed temperature. Insert the
probe, program the cooking mode, and program the
probe temperature. See the Cooking Modes section
for more information. The probe can only be used with
14. Remote Enable (on some models):
you to control your oven remotely. To be able to start
the oven remotely, press the Remote Enable pad, and
be remotely started with a connected device. Opening
the oven door or pressing the Remote Enable pad
you from being able to turn the oven on remotely. If
to change the oven settings or turn the oven off. After
icon is displayed if you wish to start the oven remotely
in the future. For instructions on how to connect your
oven, see the "Connecting your WiFi Connect Enabled
oven" instruction sheet.
15. Chef Connect:
for use with other compatible Chef Connect enabled
products like an over-the-range microwave oven or
range hood. To pair those products to the range, press
and hold the Chef Connect pad for 3 seconds and
follow the corresponding instructions included with the
mating Chef Connect enabled product if needed. The
range will cancel pairing mode after two minutes if no
mating device is detected.
Turns the oven light on or off.
Locks out the control so that
Monitors internal
®
pairing feature
Will
Allows
15