Roof Framing; Roof Anchor Installation - Werner A230400 Para El Usuario

KNOCK DOWN ROOF ANCHOR
1. The roof anchor should be located at the roof peak (when
possible) and at least 6 feet from any exposed roof edge. On
very small roof areas, locate the roof anchor as far from the roof
edge as possible.
2. Do not install roof anchors on unsupported roof structures, such
as eaves or gable overhangs. Do not install roof anchors on
facia boards.
3. Roof anchors should be installed at 8 foot intervals along the
roof ridge. Hip roofs require a roof anchor on each hip face.
4. On long low pitched
roofs, multiple roof
anchors should be
installed along the
gable ends (6 feet
from the edge) to
reduce swing fall
hazards.
d. roof framing
Roof framing members
to which the
anchors are attached
must be in good condition.
Members must be free of splits,
cracks, large knots, or defects
that may weaken the member.
Do not attach the roof anchor
to rotted or deteriorated wood.
e. roof anchor Installation:
Roof anchors
installed in accordance with
the previously discussed site
plan. Site work rules must be followed regarding when an installed
roof anchor is ready for use (i.e. after sheathing is in place).
At least one anchor
on hip roof
roof
must be
USER INSTRUCTIONS
6' 8' 8' 8' 8'
ANCHOR INTALLATION
8' 6'
Page 11