Publicidad
Idiomas disponibles
Idiomas disponibles
Installation under Windows 95
Depending on the version which you are using, Windows 95 presents one of two possible
procedures for the installation. Exactly which version you have will become clear accord-
ing to the message which appears after the computer has been restarted.
Possibility 1:
After connecting the ISDN terminal adapter, your computer must be restarted. Win-
dows 95 displays the 'New Hardware Found' window with the message that the
ISDN terminal adapter has been recognized as ELSA TanGo 2000.
Select the Driver from disk provided by hardware manufacturer option and
click on OK. The window 'Install from Disk' is displayed.
Insert the CD supplied into the CD-ROM drive and click on Browse. The 'Open' win-
dow is displayed.
Change to your CD Rom drive (e.g. d:\) and click on OK.
Select the ISDN terminal adapter ELSA TanGo 2000 under the window 'Select
model' and confirm with OK. The required files will now be copied onto the hard
disk.
In the 'Control Panel' under 'Modems', your ISDN terminal adapter should be cor-
rectly displayed under 'Properties for Modems'.
Possibility 2 (Windows 95 Service Release 2):
After connecting your ISDN terminal adapter, your computer must be restarted.
Windows 95 displays the 'New Hardware Found' window followed by the 'Update
Device Driver Wizard'.
Insert the CD supplied into the CD-ROM drive and click on Next. The 'Update
Device Driver Wizard' appears again with the message "Windows found the follow-
ing updated driver for this device: ELSA TanGo 2000".
Continue with Next. The files required will now be copied.
In the 'Control Panel' under 'Modems', your ISDN terminal adapter should be cor-
rectly displayed under 'Properties for Modems'.
Please note that the setup of the various protocols (e.g. PPP (Internet) and V.120) is out-
lined on page 13.
Installing the ISDN Terminal Adapter
11
ELSA TanGo 2000
Publicidad
