ELSA Tango 2000 Guia De Instalacion página 15

12 Installing the ISDN Terminal Adapter
Installation under Windows NT 4.0
This procedure describes how you install your ISDN terminal adapter under Windows
NT 4.0.
Use your mouse to follow the command sequence Start
Panel
In the dialog window 'Install New modem', select Don't detect my modem, I will
select it from a list and click on Next.
Now click on 'Diskette' in the 'Install new modem' window
Enter the drive letter for your CD-ROM drive and click on OK.
In the dialog window 'Install New Modem', select the ISDN terminal adapter ELSA
TanGo 2000 , confirm with Next.
Now select the COM-port your ISDN terminal adapter is connected to and confirm
with Next.
Then enter your information about your location and confirm with Next.
Click on Finish to close the installation.
The ELSA TanGo 2000 can now be operated from Windows NT 4.0. The software
components of Windows NT 4.0, such as HyperTerminal and Dial-up Network, can
make direct use of the ISDN terminal adapter.
.Please note that the setup of the various protocols (e.g. PPP (Internet) and V.120) is out-
lined on page 13.
ELSA TanGo 2000
Modems Add.
Settings Control