Power Linking; Fuse Replacement - Chauvet DJ Gobo Shot Guia Del Usuario

Power Linking

You can link up to 14 Gobo Shot products at 120 V or 23 products at 230 V. Power linking cords can be purchased
separately.

Fuse Replacement

1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same
type and rating.
5. Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the
Mounting Diagram
Mounting clamp
Safety cable
Gobo Rotation
Use the gobo rotation switch to toggle rotation on and off.
Changing the Gobo
Manual
focus
Ensure the gear on the gobo assembly lines up properly with the rotation gear inside the product.
Gobo Shot QRG Rev. 1
QUICK REFERENCE GUIDE
Safety Notes.
Mounting bracket
Gobo rotation switch
Gobo Retainer ring
EN
2