Xena XD Serie Manual Del Usuario página 3

CHAIN
10mm/14mm Hardened Steel Chain
XC10-110, XC10-150, XC10-200
XC110, XC150, XC200
CABLE
High-Tensile Steel Cable
XV110, XV150, XV200, XV400, XV800
*For more product details, please check with your local XENA dealer or visit
www.xenasecurity.com
CLAW
Chain Adaptor
CLAW14, CLAW15, CLAW18
GROUND ANCHOR
XGA-01, XGA-02, XGA-03
3
Fitting XENA to your motorcycle's brake disc
1. Thickness of brake-disc: Standard issue on virtually all
motorcycle models at just under 7mm (1/4")
2. Locking-pin size: from 7mm (1/4") to 14mm (1/2") (according
to XENA model).
3. Distance from locking-pin to back of disc-slot*: from 42mm
(1 5/8") to 65mm (2 1/2") (according to XENA model).
Area for
locking pin
*Note that the locking pin can pass through ANY hole on
the brake disc (see dark area on diagram).
Parts of XENA Alarmed Disc-Lock
1. Silicone gasket 4. Locking pin
2. Battery pack 5. Reflector
3. Lock barrel 6. Screw
The Locking System
• Insert the key in the lock and rotate clockwise. The lock barrel will spring open.
• Slide the unit on to your motorcycle's front or rear brake disc.
• Locate a hole in the brake disc that will allow the locking pin to pass through.
• Push the lock barrel down to insert the locking pin.
• For double-locking locks, turn the key counter-clockwise to lock; for push-down
locks, simply push until the barrel clicks in place.
ENGLISH
A B C
7. Alarm module
8. Module cover
(Not apply for XZ1)
4