Bosch GOP Professional 30-28 Manual Original página 10

10 | English
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Fitting
Pull the plug out of the socket before carrying out any
u
work on the power tool.
The following table shows examples of application tools. You can find additional application tools in Bosch's extensive range of
accessories.
Application tool
AIZ 10 AB
Starlock
10 × 20 mm bi-
metal plunge cut
saw blade for wood
and metal
AIZ 32 EPC
Starlock
32 × 50 mm HCS
plunge cut saw
blade for wood
PAIZ 32 APB
StarlockPlus
32 × 60 mm bi-
metal plunge cut
saw blade for wood
and metal
MAIZ 32 APB
StarlockMax
32 × 80 mm
plunge cut saw
blade for wood and
metal
AIZ 32 BSPB
Starlock
32 × 50 mm bi-
metal plunge cut
saw blade for hard-
wood
1 609 92A 5NT | (22.06.2020)
Changing the tool
Wear protective gloves when changing tools. There is
u
a risk of injury when touching the application tools.
Selecting an application tool
Please observe the application tools intended for your power
tool.
Application tool
Material Application
Softwood, soft plastics, Smaller separation and plunge cuts; delicate adjustment
gypsum, thin-walled alu- work in wood;
minium and non-ferrous Example: Cutting recess for cable, plunge cuts in gypsum
metal profiles, thin metal boards, resawing recesses for locks and fittings
sheets, non-hardened
nails and bolts
Softwood Splinter-free separation and plunge saw cuts thanks to
round sawing edge (Curved-Tec);
also for sawing close to the edge, in corners and difficult-
to-access areas;
Example: Plunge cut for the installation of a ventilation
grille or recess for plug sockets
Composite materials Quick and deep plunge cuts in wood, abrasive wooden ma-
made from wood and soft, terials and plastics, splinter-free work thanks to round cut-
non-ferrous metals, un- ting edge (Curved-Tec);
hardened nails and bolts, Example: Quick separation of non-ferrous pipes and pro-
pipes made from non-fer- files of smaller dimensions, easy cutting through non-
rous metal and profiles of hardened nails, bolts and steel profiles of smaller dimen-
smaller dimensions sions
Composite materials Splinter-free, flush and very deep cuts and plunge cuts in
made from wood and soft, wood thanks to round cutting edge (Curved-Tec), soft and
non-ferrous metals, un- non-ferrous metals and plastic;
hardened nails and bolts, Example: Recess for plug sockets and pipes, cutting
pipes made from non-fer- through non-hardened nails and bolts when flush with the
rous metal and profiles of surface, sawing through window frames
smaller dimensions
Hardwood, laminated Splinter-free separation and plunge cuts in coated boards
boards or hardwood thanks to round sawing edge (Curved-Tec),
Japan toothing specially suited for hardwood;
Example: Installation of skylights, recess for plug sockets
GOP 30-28 GOP 55-36
GOP 40-30
Bosch Power Tools