Locating The Combo Hard Disk Drive On Your Desk; Connecting Combo Hard Disk - Verbatim Combo Manual Del Usuario

Locating the Combo Hard Disk Drive
on Your Desk
Place the Combo Hard Disk drive on a sturdy desk or table that is free from
clutter that could block airfl ow around the unit. The drive is designed to
lie fl at on its rubber feet, or may stand upright using the included stand. In
either orientation take care not to block any air vents. If using the upright
orientation, install so that the ON/OFF button is at the top.

Connecting Combo Hard Disk

Combo Hard Disk provides both FireWire and USB 2.0 connections. You can
connect your Combo Hard Disk to a computer with either FireWire or USB,
but not both at the same time.
Connecting your Combo Hard Disk drive to a computer is extremely simple.
Follow the steps below.
1 Connect the included AC Adapter to the Combo Hard Disk drive, and
then to a wall outlet using the included power cord.
2 Next press the ON/OFF button on the front of the Combo Hard Disk drive.
3 Finally, connect the data cable. For USB, connect the included USB cable
from the USB port on the Combo Hard Disk drive to an available USB
port on your computer. For FireWire, connect the included FireWire
cable from one of the FireWire ports on the Combo Hard Disk drive to
an available FireWire port on your computer.
4 The Combo Hard Disk drive will mount automatically, and a new icon
will appear in My Computer (Windows) or a new icon will appear on the
desktop (Mac).
5