KS LEV Manual De Instrucciones página 11

DETERMINING CABLE AND HOUSING LENGTH
Using a 3mm Hex wrench, loosen the remote lever clamp pinch
bolt and remove the bolt. Slide the (non-hinged) lever clamp on
your handlebar and position it in the desired location. Tighten to
a torque of 1-3 N-m.
NOTE: Aftermarket models of LEV Integra use the KG alloy remote
with hinged lever clamp. See below for installation instructions.
Hinged
Lever Clamp
WITH ODI LOCK-ON
The alloy remote lever clamp can be used to replace the inner
lock ring on ODI LOCK-ON
lock ring on your grip. Replace with the seat post remote lever
clamp. Follow the instructions above. NOTE: Polycarbonate
remote lever clamp is not hinged and not compatible with ODI
TM
LOCK-ON compatible grips.
INSTALLATION
4-5 N-m
TM COMPATIBLE GRIP (AM ONLY)
TM
compatible grips. Remove the inner
7
9
Non-hinged
Lever Clamp
Pinch Bolt
1-3 N-m