Maintenance And Service - Bosch D-tect 120 Instrucciones De Funcionamiento Y Seguridad

Troubleshooting – Causes and Corrective Measures
Error
Measuring tool cannot be switched on
Measuring tool switched on but does not
react
"Service required"
"Battery temperature has
fallen short of/exceeded
battery temperature range"
"Strong radio signal
detected"
Check the measuring tool
! WARNING
each time before use. In case
of visible damage or loose components inside
the measuring tool, safe function can no longer
be ensured.
Keep the tool clean at all times.
Do not immerse the tool into water or
other fluids.
Wipe off debris using a moist and soft cloth. Do
not use any cleaning agents or solvents.
Do not attach any stickers or labels to the
sensor area 14 on the back of the detection
tool. Metal nameplates can affect the detection
results.
If the tool should fail despite the care taken in
manufacturing and testing procedures, repair
should be carried out by an authorized after-
Cause
Batteries empty
Measuring tool
has a fault
Maintenance and Service
-11-
Corrective Measure
Replace batteries
Remove and reinsert batteries
Send measuring tool to
customer service agent
Wait until the permitted
temperature range of the battery
has been reached or change the
batteries
If possible, remove the
interfering radio waves, e.g.
WLAN, UMTS, radar, transmitter
masts or microwaves.
sales service center for Bosch power tools. Do
not open the measuring tool yourself.
In all correspondence and spare parts orders,
please always include the 10-digit article
number given on the type plate of the tool.
ENVIRONMENT PROTECTION
Recycle raw materials
& batteries instead of
disposing of waste. The unit,
accessories, packaging & used
batteries should be sorted
for environmentally friendly
recycling in accordance with the
latest regulations.