Toro 117–0448 Instrucciones De Instalación página 2

2
Installing the Bracket to a Z
Master ® G3 Mower
Parts needed for this procedure:
1 Bracket
2 Bolt, (3/8 x 1 inch)
Procedure
Installing this kit on the left side allows for installation
of the Chute Gate Kit on the right side.
Install the bracket to the side of the machine with 2 bolts
(3/8 x 1 inch) (Figure 2).
1. Left side of machine
2. Bracket
Figure 2
3. Bolt, (3/8 x 1 inch)
3
Installing the Trash Bag
Parts needed for this procedure:
1 Trash bag
Procedure
Install the trash bag into the slots in the handle assembly
(Figure 3).
1. Trash bag
2
Figure 3
2. Slot in handle assembly