Care And Cleaning - Kenwood JKP250 Instrucciones

G
Be economical: do not boil more
water than you need.
G
To improve the quality of your drinks
always use fresh water.
G
Empty the kettle after each use.
4 Check the lid is closed.
5 Plug in and switch on. The indicator
light will come on.
6 Your kettle will boil and switch off
automatically. To re-boil, wait a few
seconds - the on/off switch needs
time to reset.
G
If you experience problems
with your kettle switching on
and off during use or
switching off before boiling,
check that the flat element is
free from scale - see
"descaling".
G
Take care when using the cups and
do not overfill above the inner rim
(approx. 200mls).
G
Your kettle is fitted with a filter to hold
back limescale particles.
G
If you find drops of water under your
kettle, don't worry - it is just
condensation.
boil-dry protection
G
If you switch on with too little water,
your kettle will cut out automatically.
Switch off, unplug and let it cool
down before re-filling. When it has
cooled down, the switch will reset
itself.

care and cleaning

G
Before cleaning, unplug your kettle
and let it cool down.
G
The cups and spoons can be placed
in the kettle for compact storage.
G
Wrap the cord around the kettle and
secure using the cord clip
the outside
G
Wipe with a damp cloth, then dry. Do
not use abrasives - they will scratch
the plastic surfaces.
the inside
G
Even though your kettle comes with
a filter, you still need to clean the
inside (and the filter) regularly.
the filter
1 To open the lid, pull back the lid
release catch
2 Unclip and slide out the filter
3 either rinse under the tap or use a
soft brush.
or when descaling your kettle, drop
the filter in too. Rinse thoroughly.
4 Replace the filter by locating the front
of the filter into the spout area and
then clip into place
descaling
G
Regular descaling of the flat element
will improve the performance of your
kettle. If the kettle is not descaled
regularly the build up of limescale
may result in the following:
G
problems may be experienced
with the kettle switching on and off
during use or switching off before
boiling.
G
the kettle may take longer to boil.
G
the flat element may be damaged.
5
.
.
.
.