Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
LCD Monitor Information
The indicator shown below may display on LCD when videos and photos are recorded:
Video Resolution
HD (1280 x 720, 30fps)
(1)
VGA (640 x 480, 30fps)
Photo Resolution
2592 x 1944 (5MP)
Macro Position Focusing
(2)
Normal Mode
(3)
Stabilization
1350
Number of photos that can still be taken.
01:28:06
(4)
Recording time of video that can still be taken at current resolution
00:00:12
Recording time of video during video recording
Battery: full power
01:28:06
Battery: medium power
(5)
Battery: low power
00:00:12
Battery: power empty
Zoom meter:
1X~3X (3X Digital zoom)
(6)
Exposure compensation value
EN
10
Video Recording
•
Press Left/Right Buttons
(
/
) repeatedly until the Video Recording icon (
the screen. When the desired resolution is selected, the icon will appear in the center of LCD around
2 seconds then move to the right-top corner.
•
Two resolution settings are available:
Video Quality
HD (1280 x 720, 30fps)
VGA (640 x 480, 30fps)
•
Press
Record/Enter Button (
) to take videos. When a video is recording, a time indicator will
display on LCD monitor. Press Record/Enter Button (
•
Press Playback Button
(
) to switch to Playback Mode. Press Left/Right Buttons (
previous/next video/photo. Press Playback Button (
Photo Recording
•
Press Left/Right Buttons
(
/
) repeatedly until the Photo Recording icon (
center of LCD around 2 seconds then move to the right-top corner.
•
Press
Record/Enter Button (
) to capture image.
•
Press Playback Button
(
) to switch to Playback Mode. Press Left/Right Buttons (
the previous/next video/photo.
Image Quality
2592 x 1944 (5MP)
Using Macro Function
•
Slide the macro switch to change the focus range for different distances of objects.
•
To take close-up videos/photos:
1.
Slide the macro switch to Macro (
) for object located at about 20 cm.
2.
Press
Record/Enter Button (
) to take videos/photos.
•
In Macro Mode, the macro icon (
) will appear in the center of LCD around 2 seconds.
Note:
Remember to turn the macro switch back to Normal (
up videos/photos.
Using Exposure Function
•
Adjust the exposure value to change the amount of light that the camcorder will receive when taking
videos/photos or while in Preview Mode.
•
To
adjust the exposure
value:
1.
Use Increa
se/Decrease Buttons ( ) to adjust preferred EV (Exposure Value). The exposure bar
will automatically disappear after 2 seconds.
2.
Press
Record/Enter Button (
) to take videos/photos.
/
) is displayed on
) again to stop.
/
) to view the
) to play/pause recorded video.
) is displayed in the
/
) to view
) when you are not taking close-
11
EN
Publicidad
Capítulos
Tabla de contenido
