Installation - SUNTERRA 360150 Guia Del Usuario

5

INSTALLATION

How to Install: Be sure the protective ring is screwed tightly against the housing unit. To
adjust the position of the light, tighten the nuts on the side of the lamp housing (FIG. 01).
Attach the lamp to the base or the spike using the attachment nuts (FIG. 02). Plug the
light cable into the transformer and set the light in the desired location. The transformer
should be located in a weather-protected area that is a safe distance from the water. Then
plug the transformer into a properly grounded GFCI outlet.
FIG. 01 FIG. 02
Attachment
Nut
Positioning
Nut
SUNTERRA, L.L.C. 1.866.866.4486 www.sunterrausa.com