Remote Control - Honeywell HF Serie Manual De Instrucciones

USE AND OPERATION (CONTINUED)

REMOTE CONTROL

All key functions can be accessed from the remote control.
Power Control
ON / OFF
Temperature Control
When the or key is pressed,
the set temperature is displayed
and may be adjusted
Mode Control
Press button to change the
operation mode in the order of:
Air Conditioning Dehumidifying
Fan
Auto
Sleep Control
ON / OFF
Note:
• Battery Installation: Remove the cover on the back of the remote control and insert two AAA
batteries with + and - pointing in the proper direction according to the polarity markings.
Caution:
• Use only two AAA or IEC R03 1.5V batteries.
• Remove the batteries if the remote control is not in use for a month or longer.
• All batteries should be replaced at the same time, do not mix with old batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
• Properly dispose of used batteries.
• In running mode: Auto switch off
In stand-by mode: Auto switch on
°F Press
°C
time setting for 1 hour intervals.
• Timer setting is available from 1 - 24
hours by pressing the key
• When timer is set, press the
key will cancel the timer setting.
• HIGH • MID • LOW • AUTO
Press
louver swinging up and down. Press
button again to disable the swing
function. Swing can only be set from
the remote control.
EN 10
Timer Control
or button to adjust the
or
Fan Speed Control
Swing Control
button to enable air outlet
.
or