However, if your watch should stop, simply turn the
crown
6
through a few turns clockwise to restart it.
When fully wound, your watch has a power reserve of
approximately 60 hours.
NOTE
There is no end of winding stop. A protective mecha-
nism prevents excessive winding of the movement.
2.3
SETTING THE TIME
CROWN
LOCAL TIME
CROWN
2
TIME ZONE HOUR
ND
Local time: pull the crown
C. The small seconds hand
either direction to position the hands
red local time. When the hour hand passes the 12 o'clock
position, you will see whether it is indicating midnight
(the date changes) or midday (the date does not change).
Check that the date set previously has not changed.
2nd time zone time: pull the crown
diate position B. Then turn it clockwise to position the
2nd time zone hour hand to the desired reference time.
Then push the crown
rest position A. The small seconds hand
6
PULLED OUT TO POSITION
6
PULLED OUT TO POSITION
6
out two notches to position
3
6
back in against the case to the
10
10
C
B
will stop. Then turn it in
1
and
2
6
out to the interme-
3
will restart.
:
:
to the desi-
4