Cool Mode - Pur Line RAFY SC Manual De Instrucciones

TIMER
Press button to set working hours from 1 to 12. Indicator
each press corresponds to 1 hour (1H, 2H, 3H...12H). LED screen displays ambient temperature.
Press softly to check the timer setting. Press it again within 5s to adjust the working hours again.
Long press for 3s to switch off timer setting, indicator light turns off.
OSCILLATION
Press to activate right and left oscillation, indicator
distribute the wind. Press again to stop the oscillation, indicator light turns off.
Press to activate the up and down oscillation, indicator
to distribute the wind. Press again to stop oscillation, indicator light turns off.
WIND MODE: Normal, Sleep, Natural, Super
The appliance starts at normal mode by default, press
Press to activate sleep mode, indicator
again to exit the sleep mode.
In the same way, press
to set fan speed. Press
Press to activate super wind mode, indicator turns on, the speed is at highest level. Press
exit super mode.

COOL MODE

Electric semi-conductor refrigerator technology is adopted in this model, making fast and constant water
cooling. Normally, the best cooling effect will be reached in 2 hours.
Before turning on the appliance, fill water (no more than max. Level) in the water tank and then put it in place,
also make sure the honeycomb filter is in place.
Press to activate COOL mode, the corresponding indicator turns on. The water in tank will be pumped
in the electric semi-conductor refrigerator system to cool the water quickly, then the cooling water will be
pumped up and run through the honeycomb filters, cooler wind will blow out from the air outlet in front.
Press again to turn it off, indicator light turn off.
Note:
Ice box can be an assistant water cooling. Freeze the ice box in refrigerator for 2 hours, then put it into water
tank to cool the water.
ATTENTION: the ice box must be placed in the water tank at left.
WATER SHORTAGE ALERT
In cool mode, once the water capacity in the tank is detected to be lower than warning level, the appliance
stops working and indicator
The indicator light
WATER CLEANING ALERT
This function helps remind user to clean the water tank timely in order to avoid bacteria breeding in the tank.
In standby mode, when water stays in the tank over 3 days, all indicators will keep flashing to remind user to
clean the tank and replace with new water before usage.
Note: according to testing, bacteria in the water will be over standard when it's not been used for 3 days.
to activate natural mode, corresponding indicator turns on. In natural mode, press
again to exit natural mode.
turns on in red light color and keeps flashing to remind user to refill water.
turns off and appliance starts to work again when enough water is refilled.
EN
turns on, LED screen displays timing hours,
turns on. The louvers will move right and left to
turns on. The louvers will move up and down
to set speed.
turns on. In sleep mode, press
13
to set speed. Press
again to