Lubrification - Jata Beauty MP1031B Instrucciones De Uso

• The adapter must always be used indoors. Do not use
outdoors.
• The cleaning and maintenance done by users, can not
be done by children without any supervision.
• If the cable were to deteriorate it must be changed by
an Authorised Service Centre.
• If there is any nylon filament found on the
blades, it's due to the quality control made in
each unit.
INSTRUCTIONS OF USE
• The hair clipper may be used while connected to the mains with the adapter or else autonomously
(without connecting to the mains).
Use with the cable
• Keeping the switch (7) on "OFF" position, connect the adapter plug (10) on the base of the appliance
and the adapter to the mains. Slide the switch to the "ON" position so it starts to work. Wait one or two
minutes if the clippers do not work when they are plugged in.
USE IN SELF MODE, WIRELESS. CHARGING THE BATTERY
Charging the battery.
• Before using for the first time it is necessary to charge the battery.
The battery charging can be done in two ways. In the machine or in the base.
1. CHARGE IN THE MACHINE
• Keeping the switch (7) on the "OFF" position, connect the adapter in the back side (9) and the adapter
to the mains.
• Place the appliance in vertical position over the base. The pilot light (8) will go on red colour.
• The charging of the battery may also be carried out without the base (9). It is enough to put the adapter
plug (10) into the base of the hair clippers and plug the adapter into the mains.
• The first charge of the battery will take 5-6 hours. For the later charges it will be enough to keep it
charging during 2-3 hours.
• Once charged, the charging indicator (8) will turn green.
2. CHARGE IN THE BASE
• Charging the battery in the base (9) must be for a period of 10-12 hours.
• Place the battery in the base. The same indicator will illuminate in red and will remain so as long as the
battery is inserted into the base.
• In order to optimise the durability of the battery bear in mind the following pieces of advice:
- Never exceed the indicated loading times for the battery.
- It is important to discharge the battery before it is recharged, leave it on until it stops or the power
decreases clearly.
CHANGE THE BATERY
• Keep pressed the flange of the battery and pull it. To put it back, fix it into the lower side of the
applaince and press inward.

LUBRIFICATION

• For the hair clippers to work correctly it is absolutely necessary to lubricate the blades with oil
before each use.
• Carefully pour a few drops of oil, which is provided, between the teeth of the blade, or if you have run
out, with another high quality, acid free oil.
14