Technical Specifications; System Requirement - Creative HS-1200 Manual De Instrucciones

• Do NOT operate the Digital Wireless headset system with other power adaptors.
Contact Creative Customer Support should you need a replacement power adaptor.
• Do not attempt to service any part of the digital wireless headset / USB transceiver yourself
as opening or removing covers may exposed you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.

technical Specifications

• Digital Wireless Technology: Proprietary 2.4 GHz Radio Frequency for advanced 2-way
transmission.
• Range: Up to 22 meters * (72 feet *) in a typical environment.
• Listen Time (per charge): Approximately 8 hours.
• Standby time: Up to 3 months.
• Charging time: 2.5 hours
• Charging Method: Through USB powered Transceiver DC out.
• Battery type: Lithium polymer
• Low battery indication: 3 beeps repeated every 5 seconds.
• Connectivity: USB 1.1
• USB Cable length: 80 cm/2.6 feet.
• Net Weight (without packaging):
Headphone
• Driver: 40mm Neodymium magnet.
• Frequency Response: 20 Hz ~ 20 kHz.
• Impedance: 32 ohm
Microphone
• Type: Noise cancelling condenser
• Frequency Response: 100 Hz-16 kHz
• Impedance: <10 kohm

System requirement

• Intel Pentium 4 1.6 GHz, AMD
® ®
(Pentium 4 2.2 GHz, AMD
®
• Intel , AMD or 100% compatible motherboard chipset
® ®
• Microsoft Windows Vista
®
Windows XP Service Pack 2 (SP2)
®
• 512 MB RAM
• 600 MB of free hard disk space
• CD/DVD-ROM drive
• One available USB port (for the USB transceiver)
• Installed and launched Windows Live
calls. Skype requires manual configuration.
TM
USB Transceiver – 60 g
Digital Wireless Headset – 155 g
Athlon XP 2000+ processor or faster
®
Athlon XP 2400+ processor or faster recommended)
®
32-bit or 64-bit, Windows
TM
Messenger or MSN
TM
XP Professional x64 Edition,
®
Messenger to answer / end
®
9